Compaq Armada 1120T Guía para resolver problemas descargar pdf (Pagina 165)

21. Replace the display ground cable, the LCD panel, the shield, and the

display cable into the display enclosure as follows:

o If replacing a CSTN (10.4 in) panel and shield, refer to Section

5.20.

o If replacing a CTFT (10.4 in) panel and shield, refer to Section

5.21.

22. Connect the display cable and backlight cable to the inverter board

(Section 5.19).

23. Replace the inverter board (Section 5.19).

24. Replace the display latches and springs (Section 5.19).

25. Replace the bezel (Section 5.19).

26. Position the display clutches at a 90-degree angle (Figure 5-117).

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 197 198

Sin comentarios

Compaq Armada 1120T Guía para resolver problemas Pagina 165