Compaq Compaq Portable II Guía para resolver problemas descargar pdf (Pagina 127)

11. Remove the rollers from the grooves, place them on the mandrels, and

set them aside.

To replace the display enclosure:

1. Guide the display cable assembly back through the slot in the main

enclosure.

2. With the display enclosure in the down position, guide each roller and

mandrel back into position and replace the screw.

3. While aligning the display enclosure with the plasma display hinges with

one hand, replace the four screws that secure the display enclosure to

the plasma display hinges.

NOTE: Slight movement of the display enclosure may be required to align the

roller with the groove.

4. Reverse steps 2 through 4 in the removal part of this procedure.

5. Replace the brightness control knob.

Chapter 8.26 Display Power Cable Assembly and Display Data Cable Assembly

To remove the display power cable assembly or the display data cable assembly,

or both:

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 165 166

Sin comentarios

Compaq Compaq Portable II Guía para resolver problemas Pagina 127