Compaq Compaq Portable II Guía para resolver problemas descargar pdf (Pagina 89)

To replace the memory module, simply reinsert it fully into its socket, then

reverse steps 1 through 5.

Chapter 8.13 System ROM

To remove the system ROM:

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

The ROMs are sensitive to static electricity and are shipped on conductive

foam to protect them from accidental electrostatic discharge. Do not remove

them from the conductive shipping foam until you are ready to install them.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

1. Complete the preparation procedure (see Section 8.2).

2. Remove the rear panel (see Section 8.4).

3. Remove the interface connector cover, if installed (see Section 8.5).

4. Remove the microprocessor cover (see Section 8.6).

5. Remove the system board cover (see Section 8.7).

6. Remove the 32 bit memory/modem interface board, if installed (see

Section 8.8).

7. Locate the system ROM shown in Figure 8-29.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 165 166

Sin comentarios

Compaq Compaq Portable II Guía para resolver problemas Pagina 89