Compaq Compaq Portable II Guía para resolver problemas Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 166
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
303 - 01 Keyboard LED test,
8042 self test failed.
303 - 02 Keyboard LED test,
retest test failed.
303 - 03 Keyboard LED test,
retest failed.
303 - 04 Keyboard LED test,
LED command test failed.
303 - 05 Keyboard LED test,
LED command test failed.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
303 - 06 Keyboard LED test, The following steps apply to error
LED command test failed. codes 301 - 01 through 304 - 06.
303 - 07 Keyboard LED test, 1. Check the keyboard connector.
LED command test failed. If disconnected, turn off the
computer and connect the
303 - 08 Keyboard LED test, command keyboard.
byte restore test failed. 2. Replace the keyboard and retest.
3. Replace the system board and
303 - 09 Keyboard LED test, retest.
LEDs failed to light.
304 - 01 Keyboard repeat key test
failed.
304 - 02 Unable to enter mode 3.
304 - 03 Incorrect scan code from
keyboard.
304 - 04 No make code observed.
304 - 05 Cannot disable repeat key
feature.
304 - 06 Unable to return to normal mode.
==============================================================================
Table 6-5. Parallel Printer Error Codes (4xx - xx Range)
==============================================================================
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
401 - 01 Printer connected test The following steps apply to error
failed. codes 401 - 01 through 498 - 00:
402 - 01 Printer data register 1. If a printer is connected, be
failed sure it is turned ON and in the
online mode.
402 - 02 Printer control register 2. Check the jumper settings on the
failed. system board (see Chapter 9,
"Jumper and Switch Settings").
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 165 166

Comentarios a estos manuales

Sin comentarios