Installing the Rackmount Server 3-17
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: FR-K8F6W-UA .A01 File Name: d-ch3 Installing a Rack System.doc Last Saved On: 10/4/99 1:25 PM
The sliding segment of the slide has an access hole ❶ that provides access to
three mounting holes in the stationary segment. You use two of the mounting
holes.
Front
1. Insert a cap screw through the access hole ❶ and the first (forward-
most) mounting hole
❷ in the slide and through the hole ❸ in the slide
bracket. Fasten with one two-hole nut bar
❹ on and tighten.
2. Align the access hole with the third mounting hole ❺ in the slide.
3. Insert a cap screw through the access hole and the third hole ❹ in the
slide and through the slot
❺ in the slide bracket. Fasten through the
nutbar and tighten.
Back
1. Insert a screw through the two holes ❼ in the stationary segment of the
slide and through a slot in the slide bracket. Attach to a two-hole nut
bar
❹.
Repeat the entire procedure for the other slide.
Comentarios a estos manuales