
14-4 Computer Setup and Diagnostics Utilities
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/30/00 1:54 PM
Part Number: 168893-001 File name: CH14.doc
Selecting from the Advanced Menu
Selecting from the Advanced Menu
Select To Do This
Language (or press
F2
) Change the Computer Setup language.
Boot Options Enable/disable
■
QuickBoot, which starts the computer
more quickly by eliminating some
startup tests. (If you suspect a
memory failure and want to test
memory automatically during startup,
disable QuickBoot.)
■
MultiBoot, which sets a startup
sequence that can include most
bootable devices and media in the
system. For instructions, refer to
“Changing the Startup Sequence with
MultiBoot” in Chapter 5 in this guide.
Device Options
■
Enable/disable the embedded numeric
keypad at startup.
■
Enable/disable multiple standard
pointing devices at startup. (To set the
computer to support only a single,
usually nonstandard, pointing device
at startup, select Disable.)
■
Enable/disable USB legacy support for
a USB keyboard. (When USB legacy
support is enabled, the keyboard
works even when a Windows
operating system is not loaded.)
■
Set an optional external monitor or
overhead projector connected to a
video card in a docking base as the
primary device. (When the computer
display is set as secondary, the
computer must be shut down before
undocking.)
■
Change the parallel port mode from
EPP (default) to standard,
bidirectional, EPP, or ECP.
Continued
Comentarios a estos manuales