Compaq dx2818 - Microtower PC Especificaciones descargar pdf (Pagina 117)

WARNING! To reduce risk of personal injury from hot surfaces, allow the internal system

components to cool before touching.

5. Open both latches of the memory module socket (1), and insert the memory module into the

socket (2).

Figure 8-30 Installing a DIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module with

the tab on the memory socket.

A DIMM must occupy the XMM1 socket. Always populate the white sockets before the black

sockets in each channel.

In order to create a dual-channel memory configuration, the memory capacity of Channel A must

equal the memory capacity of Channel B. Refer to

Populating DIMM Socketson page 105 for more

information.

6. Push the DIMM module down firmly into the socket, ensuring that the module is fully inserted and

properly seated. The DIMM must be pushed all the way down into the socket and sit evenly in the

socket to avoid memory corruption. Make sure the latches are in the closed position (3).

7. Repeat steps 5 and 6 to install any additional modules.

Memory 107

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 161 162

Sin comentarios

Compaq dx2818 - Microtower PC Especificaciones Pagina 117