Compaq dx2818 - Microtower PC Especificaciones descargar pdf (Pagina 73)

Installing an Internal 3.5-inch Hard Drive

1. Remove the hard drive cage and, if necessary, the existing hard drive.

2. Slide the new drive into the hard drive cage (1), aligning the drive with the four screw holes on the

cage. Install the four 6-32 standard screws that secure the hard disk drive to the hard drive cage

(2). Make sure the hard disk drive cables are facing the top of the drive cage.

NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the

old drive to install the new drive.

NOTE: If you are installing a second hard drive, use four of the extra standard 6-32 screws that

are installed on the interior of the front bezel. The 6-32 screws are silver.

Figure 7-31 Installing the Hard Drive in the Drive Cage

Drives 63

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 161 162

Sin comentarios

Compaq dx2818 - Microtower PC Especificaciones Pagina 73