Compaq dx2818 - Microtower PC Especificaciones descargar pdf (Pagina 70)

NOTE: Refer to System Board Drive Connections on page 54 for an illustration of the system

board drive connectors.

9. Replace the front bezel and access panel.

10. Reconnect the power cord and turn on the computer.

11. Lock any security devices that were disengaged when the access panel was removed.

Removing an Internal 3.5-inch Hard Drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so

that you can transfer the data to the new hard drive. Also, if you are replacing the primary hard drive,

make sure you have created a Recovery Disc Set to restore the operating system, software drivers, and

any software applications that were preinstalled on the computer. If you do not have this CD set,

select Start > HP Backup and Recovery and create it now.

1. Prepare the computer for disassembly (Preparation for Disassembly on page 37).

2. Remove the access panel (

Access Panel on page 38).

3. Remove the two screws that secure the hard drive cage to the chassis.

Figure 7-26 Removing the Hard Drive Cage Screws

60 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 161 162

Sin comentarios

Compaq dx2818 - Microtower PC Especificaciones Pagina 70