Compaq dx2818 - Microtower PC Especificaciones descargar pdf (Pagina 122)

CAUTION: After removing an expansion card, you must replace it with a new card or expansion

slot cover for proper cooling of internal components during operation.

7. To install a new expansion card, hold the card just above the expansion socket on the system

board then move the card toward the rear of the chassis so that the bottom of the bracket on the

card slides into the small slot on the chassis. Press the card straight down into the expansion socket

on the system board.

Figure 8-37 Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector

seats properly in the expansion card slot.

8. While holding the expansion card bracket against the chassis, rotate the slot cover lock over the

expansion card brackets and slot covers. Push the slot cover lock down to latch it and secure the

card brackets.

Figure 8-38 Closing the Slot Cover Lock

112 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 161 162

Sin comentarios

Compaq dx2818 - Microtower PC Especificaciones Pagina 122