Compaq dx2818 - Microtower PC Especificaciones descargar pdf (Pagina 56)

4. On the rear of the computer, a slot cover lock secures the expansion card brackets in place.

Remove the screw from the slot cover lock then slide the slot cover lock up to remove it from the

chassis.

Figure 7-10 Opening the Slot Cover Lock

5. Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached

to the expansion card.

a. If you are installing an expansion card in a vacant socket, you must use a flatblade screwdriver

to pry out the metal shield on the rear panel that covers the expansion slot. Be sure to remove

the appropriate shield for the expansion card you are installing.

Figure 7-11 Removing an Expansion Slot Cover

46 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 161 162

Sin comentarios

Compaq dx2818 - Microtower PC Especificaciones Pagina 56