Compaq Surestore L10 - Hub Guía de instalación descargar pdf (Pagina 22)

2-12 Compaq StorageWorks Fibre Channel Storage Hub 12 Installation Guide

Compaq Confidential – Need to Know Required

Writer: Susan Caesar Project: Compaq StorageWorks Fibre Channel Storage Hub 12 Installation Guide Comments:

Part Number: 340662-002 File Name: c-ch2 Overview of Installing the Compaq StorageWorks Fibre Channel Storage Hub 12.doc Last Saved

On: 4/16/99 8:19 AM

Installing the Rubber Feet for a Desktop

Installation

If the unit will not be installed in a rack, you will need to attach the four rubber

feet provided in the shipping box. These feet stabilize the base of the unit and

minimize damage to any surface on which the unit rests.

Turn the hub over and install one rubber foot in each corner of the unit. After

the rubber feet are installed, you may place the hub on a flat, level surface and

connect the cables. See the section, “Connecting the GBIC Module and the

Fibre Channel Cable,” later in this chapter.

Figure 2-12. Installing the four rubber feet - desktop installations only

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 44 45

Sin comentarios

Compaq Surestore L10 - Hub Guía de instalación Pagina 22