Compaq Surestore L10 - Hub Guía de instalación descargar pdf (Pagina 27)

Overview of Installing the Compaq StorageWorks Fibre Channel Storage Hub 12 2-17

Compaq Confidential – Need to Know Required

Writer: Susan Caesar Project: Compaq StorageWorks Fibre Channel Storage Hub 12 Installation Guide Comments:

Part Number: 340662-002 File Name: c-ch2 Overview of Installing the Compaq StorageWorks Fibre Channel Storage Hub 12.doc Last Saved

On: 4/16/99 8:19 AM

Connecting the Power Cord and

Performing a Self Test

After installing the Fibre Channel cables to the hub, you are ready to supply

power and run a system check.

1. Plug the AC power cord into the hub, then into a grounded AC outlet.

The unit will begin to run self test, which lasts 15 to 60 seconds. During

self test, all LEDs will turn on. After the unit completes the self test, the

Power LED stays on, the Fault LED turns off, and the port LEDs

assume their operational state.

Fault

Power

Figure 2-16. Checking the power LED and the fault LED

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

Sin comentarios

Compaq Surestore L10 - Hub Guía de instalación Pagina 27