Compaq Surestore L10 - Hub Guía de instalación descargar pdf (Pagina 25)

Overview of Installing the Compaq StorageWorks Fibre Channel Storage Hub 12 2-15

Compaq Confidential – Need to Know Required

Writer: Susan Caesar Project: Compaq StorageWorks Fibre Channel Storage Hub 12 Installation Guide Comments:

Part Number: 340662-002 File Name: c-ch2 Overview of Installing the Compaq StorageWorks Fibre Channel Storage Hub 12.doc Last Saved

On: 4/16/99 8:19 AM

Connecting the GBIC Module and the

Fibre Channel Cable to the Hub

The hub has 12 modular, gigabit-per-second user-configurable interface ports.

These 12 ports are compliant with the GigaBit Interface Converter, GBIC

specification. Standard GBIC Modules are hot-pluggable. To connect an

FC-AL to the hub, you will need to install a standard GBIC Module followed

by a Fibre Channel cable into one of the 12 ports. See the documentation

supplied with the module and the cable for detailed installation instructions. If

you need to obtain GBIC Modules or Fibre Channel cables, contact your local

Compaq Reseller or Authorized Compaq Service Provider. See the preface,

“About This Guide,” for information on locating your nearest Compaq

representative.

1. Gently insert one GBIC Module into any available port on the hub, until

you feel the module click into place. The module is keyed to prevent

you from inserting the module incorrectly.

CAUTION: To reduce the risk of damage to the equipment, do not use excessive

force when inserting the GBIC Module.

Figure 2-14. Installing a GBIC module

2. Plug one end of a Fibre Channel Cable into the GBIC Module installed in

step 1. (The other end of the cable connects to an active FC-AL device.)

The GBIC Module and the Fibre Channel Cable are keyed to prevent you

from installing the cable incorrectly.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 44 45

Sin comentarios

Compaq Surestore L10 - Hub Guía de instalación Pagina 25